| 1 | Novel HDPE/ZnO nanocomposites for medical applications: preparation, impact strength and antibacterial activity characterization | S Rahmanian | Modares Mechanical Engineering | 2021 |
| 2 | Numerical feasibility study of improving the melting performance of horizontal and vertical double-pipe latent heat storage systems using ultrasonic field | Saeed Rahmanian, Amin Shahsavar, Hossein Rahmanian-Koushkaki, Milad Setareh, Müslüm Arıcı | Journal of Energy Storage | 2023/9/1 |
| 3 | Evaluation of nanostructured GNP and CuO compositions in PCM-based heat sinks for photovoltaic systems | M Moein-Jahromi, H Rahmanian-Koushkaki, S Rahmanian, S Pilban Jahromi | Journal of Energy Storage | 2022/9/1 |
| 4 | Nanofluid-PCM heat sink for building integrated concentrated photovoltaic with thermal energy storage and recovery capability | S Rahmanian, H Rahmanian-Koushkaki, P Omidvar, A Shahsavar | Sustainable Energy Technologies and Assessments | 2021 |
| 5 | Investigation of heat absorber geometry effect using nanofluid and Microencapsulated PCM on the photovoltaic-thermal (PV/T) panel performance | M Moein-Jahromi, S Rahmanian, S Barzegarloo Kohi | Journal of Mechanical Engineering | 2021 |
| 6 | Numerical assessment on the hydrothermal behaviour and entropy generation characteristics of boehmite alumina nanofluid flow through a concentrating photovoltaic/thermal system | S Rahmanian, H Rahmanian Koushkaki, Amin Shahsavar | Sustainable Energy Technologies and Assessments | 2022/8/1 |
| 7 | Performance evaluation of concentrated photovoltaics with phase change materials embedded metal foam‐based heat sink using gradient strategy | Hossein Rahmanian‐Koushkaki, Saeed Rahmanian, Mahbod Moein‐Jahromi, Kamaruzzaman Sopian | International Journal of Energy Research | 2022/4 |
| 8 | Effects of pump power on performance analysis of photovoltaic thermal system using CNT nanofluid | S Rahmanian, A Hamzavi | Solar energy | 2020 |
| 9 | The influence of multiscale fillers on the rheological and mechanical properties of carbon-nanotube–silica-reinforced epoxy composite | S Rahmanian A.R.Suray B.Roshanravan R.N.Othman R.Zahari E.S.Zainudin | Materials & Design | 2015 |
| 10 | Grafting Carbon Nanotubes on Glass Fiber by Dip Coating Technique to Enhance Tensile and Interfacial Shear Strength | Bahador Dastorian Jamnani, Soraya Hosseini, Saeed Rahmanian, Suraya Abdul Rashid | Journal of Nanomaterials | 2015 |
| 11 | Performance investigation of inclined CPV system with composites of PCM, metal foam and nanoparticles | S Rahmanian, M Moein-Jahromi, H Rahmanian-Koushkaki, K Sopian | Solar Energy | December 2021 |
| 12 | [PDF] from researchgate.net Performance of Combined PCM/Metal Foam-based Photovoltaic Thermal (PVT) Collector | Mojtaba Dayer, Kamaruzzaman Sopian, Adnan Ibrahim, Anwer B Al-Aasam, Bassam Abdulsahib, Saeed Rahmanian, Ag Sufiyan Abd Hamid | International Journal of Renewable Energy Research (IJRER) | 2023/6/29 |
| 13 | Experimental evaluation of the interfacial properties of carbon nanotube coated carbon fiber reinforced hybrid composites | Shazed Aziz Suraya Abdul Rashid Saeed Rahmanian Mohamad Amran Salleh | Polymer Composites | 2015 |
| 14 | Growth of carbon nanotubes on silica microparticles and their effects on mechanical properties of polypropylene nanocomposites | S.Rahmanian .R.Suraya R.N.Othman R.Zahari E.S.Zainudina | Materials & Design | 2015 |
| 15 | Synthesis of Y-tip graphitic nanoribbons from alcohol catalytic chemical vapor deposition on piezoelectric substrate | Z Yunusa, S Abdul Rashid, MN Hamidon, S Hafiz, I Ismail, S Rahmanian | Journal of Nanomaterials | 2015 |
| 16 | Development of a Hydrogen Gas Sensor Using a Double Saw Resonator System at Room Temperature | SAIAAAS Zainab Yunusa, Mohd Nizar Hamidon, Alyani Ismail, | Sensors | 2015 |
| 17 | Investigations on composite flexural behaviour with inclusion of CNT enhanced silica aerogel in epoxy nanocomposites | Norkhairunnisa Mazlan, Norasiah Termazi, Suraya Abdul Rashid, Saeed Rahmanian | Applied Mechanics and Materials | 2015 |
| 18 | Mechanical characterization of epoxy composite with multiscale reinforcements: carbon nanotubes and short carbon fibers | S Rahmanian, AR Suraya, MA Shazed, R Zahari, ES Zainudin | Materials & Design | 2014 |
| 19 | Effect of fibre coating and geometry on the tensile properties of hybrid carbon nanotube coated carbon fibre reinforced composite | MA Shazed, AR Suraya, S Rahmanian, MA Mohd Salleh | Materials & Design | 2014 |
| 20 | Synthesis of vertically aligned carbon nanotubes on carbon fiber | S Rahmanian, AR Suraya, R Zahari, ES Zainudin | Applied Surface Science | 2014 |